Canister installation in a Carden 30% Cap 232
 A noise reduction article by B.R.Burns

br_burns_30cap-279.jpg (82828 bytes)
 
From: B.R.Burns
Sent: Thursday, May 08, 2003 3:52 PM
Subject: 30% Cap

Here are some pics of my Carden 30% Cap 232  for the quiet pages 

 B.R.Burns

.specs are      3-W 60K   Mejlik 3-blade 22/10 6700 rpm,  KS 8600 canister (from Dave @ Desert Aircraft ),  Paragon 4 " spinner with  lightened back plate,     Futaba PCM receiver,  9206 servos,   6 volt on all surfaces,   Rocket City hardware,  H9 titanium links, H9 pilot & dash,  covering is Monokote,  paint is HOUSE of KOLOR,   base coat /  clear coat,  wing bags by Caroline, Carden Canopy helmet, and to keep the Lime green from fading in the OKLAHOMA sun - DesertWare Plane lingerie (thx Joyce), 21lbs,  I quit counting after 250 hours          

br_burns_30cap-264.jpg (53841 bytes) br_burns_30cap-265.jpg (50792 bytes)

br_burns_30cap-267.jpg (45490 bytes)

br_burns_30cap-268.jpg (32630 bytes)

br_burns_30cap-269.jpg (49743 bytes)

br_burns_30cap-281.jpg (70868 bytes)

This page is hosted by http://www.rcflier.com